1. Subcontroller thermostat2. Boiler3. Electric actuators4. CCT-10 Hub Controller
CCT-10 Hub controller
CCT-10 Hub Controllers is used in water underfloor heating system. Itcan control zone valves, or boiler thermostats. As central control unit, it can alsocontrol boiler and circulating pump.According to user’s set temperature, hub controller can control to open or closeboiler, circulating pump and electric actuators, to achieve the purpose of comfort andenergy consumption saving.
Power Supply: 170-240VAC 50\60HZCurrent Load: 3ASize: 240mm X 110mm X 42mmWorking Temp: -20 - 60 celsiusStorage Temp: -20 - 70 celsiusColor: WhiteLogo: With Beok logoUser manual: https://www.dropbox.com/s/1rrn99s0bnhyn1r/CCT-10%20Hub%20Controller.pdf?dl=0
Notice :1. Due to product upgrades, the CCT-10 hub controller is now only used to connect Normally Closed(NC) electric thermal actuators!2. This is wired hub controller, the hub and the thermostat and the actuator are all wired. WiFi means that the thermostat can be controlled by the mobile phone through the APP.3. CCT-10 has no instructions in the package due to some reasons. Customers in need can download it from this link, thanks for your understandng. https://www.dropbox.com/s/1rrn99s0bnhyn1r/CCT-10%20Hub%20Controller.pdf?dl=0If you want to debug or check whether the main controller is working properly, you can press and hold the debug key before power on then press power key, while time is delay so you can quickly check the debugging requirements of the function (without operation for 20 minutes debugging function fail).The DIP switch can adjust the working time required for the delay, according to product indicator position adjustment.
(1) Before installation, removal, cleaning or maintenance of controller, you must cut off the main power, unplug the fuse orturn off the switch circuit breaker;(2) You must read the instruction in detail before installing the controller, and strictly operate thermostat accordance toinstruction;(3) Controller should be installed by professional engineering company with appropriate safety knowledge;(4) All wires connections should meet local and national standard;
Thermostat is luxurious programmable thermostat with large screen display. It is applied to temperature control of water heating applicance, especially used in Water Floor Underfloor Heating System, such as water valves and actuators .WIFI type thermostats can be controlled by mobile phone remotely ！
Power Supply: 200-240V; 50-60Hz Current Load: ≤16A(electric),≤3A(water)Power Consumption: <0.3W Warranty time : 2 yearsExternal Material: PC+ABS (flame retardant) Set Temp. Range: 5-60 Celsius Floor Set Temp. Range: 5-99 CelsiusAccuracy: ±0.5 Celsius Dimension: 86x86x45mmStorage Temp.: -5~55Celsius Certificate: CE/ROHS
Thermostat : 1 piece User Manual : 1 piece Screws: 2 pieces （Don‘t include external sensors, please buy it in the store if you need it）
M30*1.5 Thermal Electric Actuator
RZ-AN 230 thermal actuator is a two point form switching device which has been testedby TUV. It is usually applied to control radiator, floor heating system or zone valves. Itcan automatically close the flux of system under the control of room thermostat and otherelectrical switch. This model only can be used as on-off administrator.
Actuator Used to Connect with Manifolds---
1. Easy to connect with power:user only needs to reserve main supply in the place of manifold before installation, and directly connect one three-wires cable tothermostats. So user do not need professional wiring workers;2. Easy to connect wires: user only needs to connect wires according to wire colors;3. Easy maintenance after installation: all wires are very clear and neat;4. To protect boiler or pump:because hub controller has time delay function, it opens boiler and pump only when water valve is totally opened, and closes boiler when temperature reaches requirements. Time delay to open boiler and pump when heating can realize the purpose of energy-saving;5. To extend boiler and pump life:hub controller only start boiler and pump in appropriate temperature, in this way, it will reduce boiler and pump running time, toextend their working life.
We are not a unconditional return store, we do not accept return products because of appearance, color difference, or other non quality reasons. If product has a quality problem, after you receivet the products you ordered in 15 days, you can directly contact with us before a negative feedback. We will refund to you or resend a new one to you immediately!
1. If you are satisfied with our products and services, it is very kind of you to leave a five-star praise ^*^ 2. If you have any questions or are not satisfied, please contact us without dispute or bad review, we will try our best to solve it for you!